Laminated lampshades
In order to meet your individual requirements, we can produce our lampshades in a variety of different shapes and sizes according to your wishes.
For sizes with a diameter larger than 80 cm, we use a wire that is 5 mm thick.
Please do not hesitate to contact us if you require a different shape or size than the types listed below.
Lampshade models (sizes and shapes)
1.) Square
Min. 12/12 x 12/12 x 14 cm
Max. 150/150 x 150/150 x 50 cm
2.) Rectangular
Min. 18/12 x 18/12 x 13 cm
Max. 180/60 x 180/60 x 50 cm
3.) Ellipse
Min. 20/14 x 20/14 x 15 cm
Max. 100/30 x 100/30 x 40 cm
4.) Oval / conical
Min. 20/14 x 14/9 x 13 cm
Max. 130/50 x 110/40 x 35 cm
5.) Oval
Min. 20/12 x 20/12 x 14 cm
Max. 160/40 x 160/40 x 50 cm
6.) Round / conical
Min. Ø 12 x Ø 8 x 13 cm
Max. Ø 80 x Ø 60 x 50 cm
7.) Pointed oval
Min. 20/14 x 20/14 x 15 cm
Max. 50/25 x 50/25 x 30 cm
8.) Round / cylinder
Min. Ø 10 x Ø 10 x 14 cm
Max. Ø 200 x Ø 200 x 40 cm
9.) Wall molding square
Min. 15/12 x 15/12 x 15 cm
Max. 40/16 x 40/16 x 35 cm
10.) Wall molding round / conical
Min. 18/9 x 12/6 x 16 cm
Max. 35/17 x 20/10 x 35 cm
All specifications are conform to: below length / width x above length / width x height (no. 1 – 5, 7, 9 and 10)
respectively round shapes: diameter below x diameter above x height (no. 6 and 8)
Specified it always the smallest and the largest possible size of the particular shape.
Between these dimensions you are free to choose the size of your model.